Relay cable set 1B | DT 20A 12V

Relay cable for safe power supply of a lightbar or for one or a third auxiliary light with DT (Deutsch) connector. If your car has halogen high beam, you can generally use this cable.

The recommended maximum real power is 120W/10A (up to a nominal of about 160W, e.g. 16pcs 10W LEDs).

Suitable for the following items, among others:
Light ramps: Luxtar X6, X8, X10, X12, X16
Extra light: –

See option Extra light cable 1B 12V if you have a higher power ramp/extra light.
See also version 2xDT for two lamps (art 103105-2).

A power strip is supplied for connecting the signal cable (+).
See picture for installation instructions.

Current: 12V
Relay: 20A
Fuse: 20A
Weight: 245 g
Cable area: 2 or 2.7 mm²
Length: 1.7 metres
= total length 2.5 metres including 0.8 metres of ramp cable.

Note that some cars require a special relay solution (see accessory XBB) due to so-called. Can-bus monitoring. This mainly applies to newer European cars with LED or xenon lights.