Relay cable set 3B | 9006 24V

Relay cable for 3 extra lights for safe power operation of 24V xenon ballasts, extra lights, led ramps etc. on lorries, buses, work vehicles, tractors etc.

On this relay cable set you will find 3 cables where each end is terminated with a 9006 contact (male) a plus and minus cable and signal cable to be connected to the vehicle's 24v plus when high beam activation.

There is a fuse (40A) and a relay of 24V 60A on the relay cable where we recommend attaching the relay upwards for best results. This kit also has a length of 3 metres, the measurements are from the plus cable to the end of the 9006 connectors.
This product facilitates installation and also provides a safe use for 3 xenon extra lights.
Note that some cars require a special relay solution (see accessory XBB Lightswitch) due to so-called. Can-bus monitoring. This mainly applies to newer European cars with LED or xenon lights.
Good to know
We have used protective flexi tubes, which reduce damage to the wiring in confined spaces.

Connection
3 9006 connectors for quick connection

Relay
60A relä, säkring på 40A – Vilket gör att du kan driva stora lyktor utan problem på detta kablage.

Protected data
Flexi hose around the wiring harness, ensures that you do not get any strong EMC radiation out, and that cables do not rub against the body or the like.

Effect
You can power lanterns up to about 300w each with this wiring harness.

Guarantee
1 year

Delivery content
When ordering, 1 complete relay cable and 1 power strip are included.