
Your basket is empty.
Here you will find vehicle lighting that fits Mitsubishi Asx 2010 and later. Depending on the model, Asx uses D2S, H11 or HB3. Here we list the right choice for each position, together with additional lights and ballast. Some model years and versions have integrated full-LED where low beam and high beam are not replaced as separate lamps. Select the model year above to see what applies to your car.
â Back to the car selectorAsx uses D2S for xenon or H11 for halogen in the low beam. Check the headlight type to choose the right one.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
Asx uses HB3 (halogen) in the high beam.
Packages both with and without XBB. Packages with XBB fit cars with LED or canbus electronics, many also install without.
Extra lights and ramps that fit the car.
The base in the fog light differs between model years. Select the model year above to see exactly the right bulb for your car.
The socket in the front turn signals differs between model years. Select the model year above to see exactly the right bulb for your car.
Asx uses W5W in the parking lights.
Asx uses P13W in the daytime running lights.
The socket in the rear turn signals differs between model years. Select the model year above to see exactly the right bulb for your car.
Asx uses W5W in the license plate lighting.
Ballast and control unit that fits the car.
Car accessories, model-specific first.
The Mitsubishi Asx has LED lighting from the factory. Therefore, choose an auxiliary light package with XBB and the auxiliary light will be switched on without error messages or flickering.
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
Low beam D2S or H11, high beam HB3 and fog light H8, H11 or H16.