Here you will find vehicle lighting that fits Ford Puma 1997 and later. Depending on the model, Puma uses HB3 or H1. Below you will see the correct lighting for each light position, plus additional lights and ballast that fits the car. Some model years and versions have integrated full-LED where low beam and high beam are not replaced as separate lamps. Select the model year above to see what applies to your car.
Puma uses HB3 for halogen or H1 for LED in the high beam. Check the headlight type to choose the right one.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
Free shipping over £159
Secure payments with Klarna
B2B LOGIN
