Here you will find vehicle lighting that fits the Toyota Land Cruiser 200 2007 and later. Depending on the model, the Land Cruiser 200 uses D4S, H11 or HB3. Below you will see the correct lighting for each light position, plus additional lights and ballast that fits the car.
Low beam headlights that fit Toyota Land Cruiser 200
The Land Cruiser 200 uses D4S for xenon or H11 for halogen in the low beam. Check the headlight type to choose the right one.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
Det finns modellanpassade kit för Toyota Land Cruiser 200, till exempel Lazer Ledrampskit Toyota Landcruiser 200 2x Triple-R750 Std, Lazer Ledrampskit Toyota Landcruiser 200 2x Triple-R750Elite och Lazer Monteringssats Toyota Landcruiser 200 2x Triple-R 750. De ligger under Modellanpassade kit. Ramper och extraljus med universella fästen passar också.
Har min Toyota Land Cruiser 200 halogen eller xenon?
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
Vilka lampor sitter i Toyota Land Cruiser 200?
Halvljus D4S eller H11, helljus HB3 och dimljus HB4.
Free shipping over £159
Secure payments with Klarna
B2B LOGIN
