Below you will see lighting adapted for Mazda 3 2003 and later. Mazda 3 uses different sockets depending on the light position and design. Here we list the correct choice for each position, together with additional lights and ballast. Some model years and designs have integrated full-LED where low beam and high beam are not replaced as separate lamps. Select the model year above to see what applies to your car.
Select model year för att se exakt rätt lampor till din Mazda 3.
Low beam headlights that fit Mazda 3
The base in the low beam differs between model years. Select the model year above to see exactly the right bulb for your car.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
The base in the high beam differs between model years. Select the model year above to see exactly the right bulb for your car.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
Mazda 3 har LED-belysning från fabrik. Välj därför ett extraljuspaket med XBB, så kopplas extraljuset in utan felmeddelanden eller flimmer.
Har min Mazda 3 halogen eller xenon?
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
Vilka lampor sitter i Mazda 3?
Halvljus D2S, H7, H11 eller D4S, helljus HB3, D2S, D4S eller H15 och dimljus H11 eller HB4.
Free shipping over £159
Secure payments with Klarna
B2B LOGIN
