Below you will see lighting adapted for the Honda Cr-Z 2010 to 2013. Depending on the version, the Cr-Z uses D4S, H11 or HB3. Below you will see the correct lighting for each light position, plus additional lights and ballast that fits the car.
Cr-Z uses D4S for xenon or H11 for halogen in the low beam. Check the headlight type to choose the right one.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
What lights are in the Honda Cr-Z?
Low beam D4S or H11, high beam HB3 and fog light H11 or H8.