We have collected the lighting that fits the KGM Musso EV 2019 and later. The Musso EV uses different sockets depending on the light position and design. Below you will see the correct lighting for each light position, plus additional lights and ballast that fits the car.
Musso EV uses D8S for xenon and H4 or H7 for halogen in the low beam. Check the headlight type to choose the right one.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
H4 is the same bulb for low and high beam, so one pair is enough. If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
Musso EV uses H1 for xenon or H4 for halogen in the high beam. Check the headlight type to choose the right one.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
H4 is the same bulb for low and high beam, so one pair is enough. If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
There are model-specific kits for the KGM Musso EV, for example the Lumen grill kit KGM Musso EV 25+. They are located under Model-specific kits. Ramps and additional lights with universal brackets also fit.
Does my KGM Musso EV have halogen or xenon?
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
What lights are in the KGM Musso EV?
Low beam D8S, H4 or H7, high beam H1 or H4 and fog light H16.