
Your basket is empty.
Here you will find vehicle lighting that fits Nissan Juke 2010 and later. Juke uses different sockets depending on light position and design. Below you will see the correct lighting for each light position, plus additional lights and ballast that fits the car. Some model years and designs have integrated full-LED where low beam and high beam are not replaced as separate lamps. Select the model year above to see what applies to your car.
â Back to the car selectorJuke uses H4 or H11 for halogen and D2S for xenon in the low beam. Check the headlight type to choose the right one.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
Juke uses HB3 or H4 in the high beam depending on the model.
Packages both with and without XBB. Packages with XBB fit cars with LED or canbus electronics, many also install without.
Extra lights and ramps that fit the car.
Juke uses H11 or H8 in the fog lights depending on the model.
The socket in the front turn signals differs between model years. Select the model year above to see exactly the right bulb for your car.
Juke uses W5W in the parking lights.
The socket in the rear turn signals differs between model years. Select the model year above to see exactly the right bulb for your car.
Juke uses W21/5W in the brake light.
Juke uses W5W in the license plate lights.
Ballast and control unit that fits the car.
Car accessories, model-specific first.
The Nissan Juke has LED lighting from the factory. Therefore, choose an auxiliary light package with XBB and the auxiliary light will be switched on without error messages or flickering.
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
Low beam H4, H11 or D2S, high beam HB3 or H4 and fog light H11 or H8.