Below you will see lighting adapted for the Skoda Yeti 2009 to 2017. The Yeti uses different sockets depending on the light position and design. Below you will see the correct lighting for each light position, plus additional lights and ballast that fits the car.
Yeti uses H4 or H7 for halogen and D1S or D3S for xenon in the low beam. Check the headlight type to choose the right one.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
H4 is the same bulb for low and high beam, so one pair is enough. If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
Yeti uses H4 for halogen and D1S or H7 for xenon in the high beam. Check the headlight type to choose the right one.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
H4 is the same bulb for low and high beam, so one pair is enough. If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
There are model-specific kits for the Skoda Yeti, for example Voolbar Skoda Yeti 2014-. They are under Model-specific kits. Ramps and additional lights with universal brackets also fit.
Does my Skoda Yeti have halogen or xenon?
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
What lights are in the Skoda Yeti?
Low beam H4, D1S, H7 or D3S, high beam H4, D1S or H7 and fog light H7 or H8.