Additional lights that fit Mercedes-Benz Sprinter 4.6-t Platform/Chassis
We have collected the lighting that fits the Mercedes-Benz Sprinter 4.6-t Platform/Chassis 2006 to 2018. Depending on the version, the Sprinter 4.6-t Platform/Chassis uses D3S, H7 or D1S. Below you will see the correct lighting for each light position, plus additional lights and ballast that fits the car.
Select model year to see exactly the right lights for your Mercedes-Benz Sprinter 4.6-t Platform/Chassis.
Low beam headlights that fit Mercedes-Benz Sprinter 4.6-t Platform/Chassis
The base in the low beam differs between model years. Select the model year above to see exactly the right bulb for your car.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
â15 %Change both low and high beams
Two lights for two jobs. Premium Canbus is made for low beam, HERO for high beam.
High beam that fits Mercedes-Benz Sprinter 4.6-t Platform/Chassis
The base in the high beam differs between model years. Select the model year above to see exactly the right bulb for your car.
Halogen or xenon? Here's how to tell the difference
Xenon: white to blue-white light that comes on with a short flash and becomes fully bright after a few seconds. The car almost always has headlight washers and automatic level control. The socket starts with D, for example D1S or D3S.
Bi-xenon: xenon which also provides the high beam. The same bulb is used for low and high beam.
Halogen: Yellower light that lights up immediately without delay. The socket starts with H, for example H7 or H4.
Factory LED: bright white light in strips or small modules. Often there is no lamp to replace.
Still unsure? Look at the lamp you have today, in the instruction manual, or contact us with your registration number and we will help you.
If you choose Luxtar HERO, adjust the headlights down slightly after installation so that you do not dazzle oncoming traffic.
Frequently asked questions about Mercedes-Benz Sprinter 4.6-t Platform/Chassis
Which additional lights fit the Mercedes-Benz Sprinter 4.6-t Platform/Chassis?
There are model-specific kits for the Mercedes-Benz Sprinter 4.6-t Platform/Chassis, for example Voolbar Mercedes Sprinter 2014-. They are under Model-specific kits. Ramps and additional lights with universal brackets also fit.
Does my Mercedes-Benz Sprinter 4.6-t Platform/Chassis have halogen or xenon?
Both are available. Xenon gives a white to blue-white light that becomes fully bright after a few seconds, and the car usually has headlight washers. Halogen gives a yellower light that turns on immediately.
What lights are in the Mercedes-Benz Sprinter 4.6-t Platform/Chassis?
Low beam D3S, H7 or D1S, high beam D3S, H7 or D1S and fog light H11 or H7.