Relay cable kit for XBB OBD-II Power Unit – DT

Wiring harness excl. relay with DT connector for direct connection and safe power operation of a xenon ballast or LED ramps such as LUXTAR LED ramp X6, X8, and up to X10 which has a corresponding connector.

12-24V (15A )DC

40A fuse

This cable set together with XBB OBD ll can power LED ramp and/or auxiliary lights up to 15A (real power).

Interconnection
1. connects to battery (+), earth point (-)
2. power connector (+/-) on ballast (or lightbar cable)

Special instructions are not included.

Good to know
If you shorten the wiring, you can operate LED Ramps or Extra Lights with higher power.
When extended, the maximum power is reduced.
The maximum distance between battery and light source is 3 metres.
Works equally well with halogen auxiliary lights.

Weight: 0.27 kg

Find out more about how to use XBB Dongle and Power Unit.