Ultimate Ceramic Coating

For best results, we recommend that the paint finish is in the best possible condition before use.

Do a three-step polishing (clay, rubbing and polish) before application to ensure the best adhesion and finish.

INSTRUCTIONS: WASH WELL Wash and dry the vehicle thoroughly before application. Apply in the shade, on cool surfaces. If the surface is warm when applied, you will experience an uneven result. We recommend using the highest quality microfibre such as Meguiar's® Supreme Shine™ & Even Coat Microfibre Applicator Pads.

1. Spray the product onto a microfibre applicator such as Meguiar's X3080. We recommend that you make one panel at a time.
2. Spread the product with the pulley with a light to moderate pressure over the panel in a cross stroke motion. This step is what activates the curing process.
3. Wait about 15 seconds and then wipe the product with a clean microfibre cloth once you have applied it to the surface.
4. Continue this process over the entire vehicle.
5. Wash all microfibre cloths & pulleys immediately after treatment.

You can use this product on other exterior surfaces such as plastic mouldings, decals, paint protection film (PPF) and wheels. Follow the same procedure for these other exterior surfaces. The durability will vary depending on the original condition of the surface.

MAINTENANCE:

Washing the vehicle frequently ensures maximum durability for as long as possible. Wash your vehicle with pH-balanced car shampoos, such as Meguiar's® Ultimate Wash & Wax or Meguiar's® Hybrid Ceramic Wash & Wax.

To ensure that the Ultimate Ceramic Coating maintains its finish for as long as possible, use only premium maintenance products such as Meguiar's® Ultimate Quik Detailer™ or Meguiar's® Hybrid Ceramic Detailer, as often as desired.

WARNING: After the paint has been treated with Ultimate Ceramic Coating, do not use clay, polish, rubbing, liquid or paste waxes on your vehicle, as these will remove or reduce the effect of the coating.

INSTRUCTIONS FOR USE: Spray, spread & wipe off. Do not over-dose - one bottle is enough for four medium-sized vehicles! Not recommended for matt or satin paints as it will produce unwanted gloss.

Content: 236 ml

Colour coding

https://meguiars.se/wp-content/uploads/2024/03/Label-MeguiarsUltimateCeramicCoatingG2401_1.0_66423-5.pdf