Accessories (so-called sensor extinguishers) to switch off any parking sensors.

If you fit auxiliary lights, a front bar, Voolbar or similar, two of the parking sensors are often covered.

This is the third generation that works on most car models.

Requires no intervention on the car, mounted in front of the parking sensor and thus extinguishes it by the signal bouncing back. Normally you only need to cover 2 of 4 sensors in front. If the sensors still alarm, it is usually because the PDC pads are not mounted correctly. These are third generation PDC pads to cope with the latest generation of strong sensors but as there are new car models coming out all the time, it is not certain that they will switch off the sensors on all cars.

Other/important info: The surface must be thoroughly cleaned before installation and there must be no air between the sensor and the PDC pad. The surface should be completely dry when the PDC pad is glued on.

Price per unit.