Relay cable set 2B | DT 20A 12V

Relay cable for safe power supply of 2 light bars or 2 auxiliary lights with DT (Deutsch) contacts and car without special requirements (so-called Can-bus). If your car has halogen high beam, you can generally use this cable.

The recommended maximum power is 120W/10A (up to a nominal of about 160W, e.g. 16pcs 10W LEDs).

Suitable for the following items, among others:
Ramps: X6, X8, X10, X12, X16
Extra light: -

See option Extra light cable 1B/2B/3B if you have lights with higher power than 120W/10A.

A power strip is supplied for connecting the signal cable (+).
See picture for installation instructions (showing cable version with 1st DT).

Current: 12V
Relay: 20A
Fuse: 20A
Weight: 245 g
Cable area: 2 or 2.7 mm²
Length: 1.7 metres
= total length 2.5 metres including 0.8 metres of ramp cable.

Note that some cars require a special relay solution (see accessories XBB and/or CanM8) due to so-called. Can-bus monitoring. This mainly applies to newer European cars with LED or xenon lights.