Tershine Dissolve – Cold degreasing 5 L

Cold degreasing used against asphalt cracks and other petroleum-based dirt such as diesel, soot, gasoline, grease, oil and adhesive residue.

Very effective
Low aromatic, almost odorless
Kind to plastic, lamps and rubber
Effective against road salt
Effectively removes winter dirt
Ready to use
Can be applied to wet surface
Free from PFAS

Dissolve 5000 ml is a low-aromatic cold degreaser (smells almost nothing) that effectively dissolves asphalt, oil and other petroleum-based dirt. Can be applied to both wet and dry surfaces. I have chosen to go with a gentler (non-flammable) mixture that minimizes the risk of damage or problems. This means that it can and should stay on a little longer than many others. Of course, it is no less effective for that.

1. Apply evenly over the surface (normally from the handles downwards)
2. Let it sit for a few minutes, remember that in colder weather it should sit for considerably longer.
3. Rinse from bottom to top
4. Continue with the next step in your washing procedure.

Ps. Of course, it can be used for example for engine washing etc. Also remember that the product should remain on the surface longer at cold temperatures (up to 15 min ish). For best effect, Extract should also be used on top of Dissolve – Cold degreasing after step 2. Extract – Alkaline degreasing will also be needed, i.e. it is not enough to degrease just once a year. If you have really stubborn asphalt spots that do not disappear, Prime – Panel Wipe is absolutely magical at removing them, so try it in selected places.

Safety data sheets are available on request.

DANGER: May be fatal if swallowed and enters respiratory tract.
Repeated contact may cause dry skin or skin cracking.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
Do not induce vomiting. Keep away from heat/sparks/open flame.
No smoking. Keep locked up. The contents of the container should be left to a
approved waste facility. Contains aromatic hydrocarbons >30%.